Bixpy Jet and Accessories

Bixpy Motor and Quick-Swap Kit by Viking

Qty:1

Code: PLU 8511

Matt Watson loves the Bixpy jet, watch his review video.

This incredible micro jet motor can power you along at up to 10kph, although the best way to use it is as a paddle assist (kind of like an E-Bike, you still paddle, but it's much easier) using it this way you can extend your range from 10km to 25km+!

*Lightweight, just 4kgs incl battery

*30lbs of Thrust, Up to 12 hrs run time! 

Totally hands free, the steering is done via the foot rests controlling the rudder and direction of the motor's thrust. 

The unique feature that separates this motor from all others is the micro propeller, at just 60mm wide it creates almost NO DRAG when you want to paddle your kayak without the motor running.

It clips on with the supplied carabinas and R pin to make swapping between a rudder and the motor super quick and easy in only 20 seconds!

For customers who don't have a rudder on your Viking Reload / GT/ 400 / 440 then you will also need the Rudder and Toe Tab kit. If you would like the option of swapping between the Bixpy motor and standard rudder, then you will need the complete rudder kit instead.

This Kit includes:

- Complete Bixpy motor system (motor, battery, remote control, battery charger)

- Headstock

- Blade

- Uphaul kit assembled.

Specifications: 

- Max run time: Low Speed >12 hours,

- Max run time: Full speed approx 75 min.

- Max speed: Up to 10kph (depending on type of craft)

- Range: Up to 25km if used as paddle assist on lower power setting. Around 10km if not also paddling.

- Motor weight: 1.2kg

- Battery weight: 3.2kg

Bixpy Kit for Non-Ruddered Kayaks by Viking

Qty:1

Code: Bixpy Kit for Non-Ruddered Kayaks

Using a Railblaza Motor Mount and the Bixpy transom mount allows you to fit a Bixpy motor to almost any kayak, these photos are of the Viking 2+1 double kayak fitted with this Bixpy/Railblaza combo. (The kayak is not included).

Installation is straight forward, simply attach two Railblaza Starports (supplied), a stainless Steel saddle for the stabilizing latch and four attachment hooks for the battery and you are ready to go!

What you get:

One Bixpy motor, battery, charger and remote control

One Bixpy transom mount

One Ralblaza motor mount with two round Starports with base plates and four M6 bolts or 14g screws

For the stabilizing latch - One stainless steel saddle and two 10g screws

For mounting the battery - Four lashing hooks, 8 x 8g screws and Shock cord fitted to the Bixpy battery 

Bixpy Motor and Quick-Swap Kit by Viking

Matt Watson loves the Bixpy jet, watch his review video.

This incredible micro jet motor can power you along at up to 10kph, although the best way to use it is as a paddle assist (kind of like an E-Bike, you still paddle, but it's much easier) using it this way you can extend your range from 10km to 25km+!

*Lightweight, just 4kgs incl battery

*30lbs of Thrust, Up to 12 hrs run time! 

The unique feature that separates this motor from all others is the micro propeller, at just 60mm wide it creates almost NO DRAG when you want to paddle your kayak without the motor running.

Bixpy Jet Specifications: 

- Max run time: Low Speed >12 hours,

- Max run time: Full speed approx 75 min.

- Max speed: Up to 10kph (depending on type of craft)

- Range: Up to 25km if used as paddle assist on lower power setting. Around 10km if not also paddling.

- Motor weight: 1.2kg

- Battery weight: 3.2kg 

Bixpy Motor and Battery by Viking

Qty:1

Matt Watson loves the Bixpy jet, watch his review video.

This incredible micro jet motor can power you along at up to 10kph, although the best way to use it is as a paddle assist (kind of like an E-Bike, you still paddle, but it's much easier) using it this way you can extend your range from 10km to 25km+!

*Lightweight, just 4kgs incl battery

*30lbs of Thrust, Up to 12 hrs run time! 

Totally hands free, the steering is done via the foot rests controlling the rudder and direction of the motor's thrust. 

The unique feature that separates this motor from all others is the micro propeller, at just 60mm wide it creates almost NO DRAG when you want to paddle your kayak without the motor running.

This kit includes the Bixpy Jet Motor, 333wh battery and charger and the remote only. You will need to also purchase the correct adapter to suit your kayak, paddle board or small boat.

For Viking kayak owners who do have a rudder system on their kayak, the Bixpy Quick Swap Kit simply drops into the rudder bracket, replacing the standard rudder with the Bixpy Jet Motor. 

For Viking kayak owners who don't have a rudder on your Reload / GT/ 400 / 440 then you will also need the Rudder and Toe Tab kit. If you would like the option of swapping between the Bixpy motor and standard rudder, then you will need the complete rudder kit instead.

Specifications: 

- Max run time: Low Speed >12 hours,

- Max run time: Full speed approx 75 min.

- Max speed: Up to 10kph (depending on type of craft)

- Range: Up to 25km if used as paddle assist on lower power setting. Around 10km if not also paddling.

- Motor weight: 1.2kg

- Battery weight: 3.2kg

Bixpy Battery with Remote Controller by Viking

Qty:1

Code: PLU 8488

This kit includes the Bixpy 333wh battery and the remote only. 

Specifications: 

- 29v

- 333wh

- 16ah

- Run Time up to 6hrs lower speeds and 75 minutes on full speed.

Bixpy Remote Controller by Viking

Qty:1

Code: PLU 8649

Bixpy remotes work on radio frequency and they are all made to control all Outboard Power Packs.

You can run two or three batteries using the same remote without worrying about pairing and losing signal while you're motoring.

The remotes features 10 speeds forward, 3 speeds in reverse and a "dead stop" button.  They are super intuitive and you can use your reverse button to slow down your forward speeds and your forward buttons to slow down your reverse speeds. 

Bixpy Magnetic Kill Switch by Viking

Qty:1

Your Kill Switch is used to turn your Outboard Power Packs on and off. 

Bixpy Universal Rudder Adapter by Viking

Qty:1

Code: PLU 8830

One of the simplest, fastest and most efficient ways to use the Bixpy on a kayak is on the rudder of the kayak. However, not all kayaks have rudders and the ones that do, don’t always offer a robust enough rudder mount to run the motor well and without damaging the kayak.  

The Bixpy Universal Rudder Adapter is designed to give you the option to mount a rudder on virtually any kayak. If your kayak already has a robust 10mm pin hole for a rudder, all you need is the Bixpy Universal Rudder Adapter. If your kayak doesn’t already have a 10mm pin holder for a rudder, you can purchase the Bixpy Gudgeon, which provides a super robust and adaptable 10mm rudder pin holder for your Bixpy Universal Rudder Adapter. 

The Bixpy Universal Rudder Adapter features a pull cord, a kick up feature and “lock-down” for reverse speeds. (Does not include the Bixpy Jet)

Bixpy Hobie Twist and Stow Rudder Adapter

Qty:1

Code: Hobie Twist and Stow

The Bixpy Hobie® Twist & Stow Rudder Adapter replaces your rudder with a Bixpy Rudder and Jet. Steering is done using your Hobie® steering system. (Does not include the Bixpy Jet)

Bixpy Adapter for Inflatables

Qty:1

Code: Bixpy Adapter for Inflatables

If you own an inflatable kayak or an inflatable stand up paddle board and would like to motorize it, you now have the perfect companion: the Bixpy Adapter for Inflatables.

You can attach this adapter to any inflatable watercraft using PVC or urethane adhesive glue.

INCLUDES

Bixpy Adapter for Inflatables 

All hardware required

Wire to run to your Bixpy Outboard Power Pack 

Instructions

Bixpy Universal Motor Bracket by Viking

Qty:1

Code: PLU 8444

With the Bixpy Universal Kayak & Canoe Adapter, you can attach your Bixpy Jet to virtually any kayak, canoe or similar watercraft. The aluminum pipes will adjust to accommodate virtually any length, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various kayaks.  

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, the Bixpy Universal Kayak & Canoe Adapter comes complete with all the nuts and bolts you’ll need and complete instructions.

Includes:

- Bixpy Universal Kayak & Canoe Adapter

- All hardware required to attach to kayaks and canoes

- Wire to run to your Bixpy Outboard Power Pack

- Instructions sheets

Bixpy Transom Mount for Boats by Viking

Qty:1

With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet motor to virtually any small watercraft, dinghy or tender. The Bixpy is the perfect alternative to having a heavy, smelly and hard to start small petrol motor. It only weighs around 2kg with the motor attached, so anyone can lift it and easily attach it to your boat.

Ideal for tenders used on launches - no petrol fumes or lifting heavy and awkward motors from below deck. The Bixpy is compact so it can fit inside lockers and because there are no petrol fumes it can be stowed anywhere with easy access.

The shaft holding the motor also features a “kick-up” mechanism that will allow the motor to release and swing if it hits bottom. The aluminium pipe will adjust to accommodate virtually any depth to suit your boat. 

Speed is around 4-8kph depending on the size and load on the boat. Range is around 5-8km with normal use, perfect for getting from boat to boat or boat to shore and back. It's small and light enough to take with you once onshore, the complete package including the battery only weighs approx 5kg.

Includes:

- Bixpy Universal Transom Adapter

- All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft

- Wire to run to your Bixpy Battery Box

- Tiller Steering Handle (2 sizes - 12" and 24" included)

- One Rubber grip for tiller handle 

Features:

- Fits virtually any transom plate

- Adjustable depth

- Quick release disassembly

- Adjustable trim

- Super sturdy construction

Bixpy DIY Adapter for Rudders and Fins by Viking

Qty:1

Code: PLU 9143

This adapter fits onto Viking Kayaks rudder blades and other makes also. 

This is also the adapter for paddle boards when matched up with the correct fin box adapter.

Bixpy Uphaul Bracket for Bixpy Motor Rudder by Viking

Qty:1

Code: PLU 8515

This is the part you need if you want to simply add the Bixpy Jet Motor to your existing Viking rudder. This uphaul system allows you to use reverse and to pull the motor up for launching and very shallow water.

Without the uphaul / lock down bracket the motor will come out of the water when in reverse speeds.

Add this 'Uphaul Bracket Kit' when ordering your Bixpy Motor if you would like to DIY and fit the Bixpy to your rudder.

Kit includes:

- Aluminium uphaul bracket and mounting bolt

- Shock cord tensioner

- Uphaul cord and jamb cleat

- Guides and screws for the uphaul cord

Bixpy Rudder Bracket & Toe Tabs Kit by Viking

Qty:1

Code: PLU 9024

Fit these Toe Tabs and the rudder bracket if you are fitting a Bixpy motor, but don't currently have a rudder system.

Kit includes: toe tabs, cords, screws and rudder bracket.

Bixpy Power Extension Cable 1.4m OR 2.7m by Viking

Qty:1

1.4m Code: PLU 9345

2.7m Code: PLU 8487

The Bixpy Extension Cord allows you to place your Outboard Power Pack further from your motor. If you would like to store your battery in the front hatch of your kayak or Standup Paddle Board or simply want the battery further from your motor, this is what you'll need. Like any other extension cord, you can plug multiple cords together to achieve a desired length.  

It is important to remember that extension cords do reduce the efficiency of the system, specially at higher speeds. So buy the shortest cable you need for your purpose. There is roughly a 1% to 4% power loss with a 4.5 ft extension cord and a 2% to 8% power loss with the 9 ft cable. 

*The standard cable supplied with the battery is long enough for the battery to be positioned near the rear of the kayak only.

Bixpy Retainer Kit for battery and power cable by Viking

Qty:1

Code: PLU 8994

Includes retaining clips for the power cable and bungee straps and lashing hooks for the battery. Ideal for when you wish to run an extension cable to the battery fitted on the oval hatch up front.

Fitting the battery up front allows you to see the power level lights and easily replace the magnetic kill switch should it come off. The remote has a better line of sight to the battery so works better also.