New Zealand Made Flying Gaff Heads
These heads are available in three sizes and each size comes complete with 6 metres of rope
Medium Head 12mm 304 Stainless Steel
Large Head 16mm 304 Stainless Steel
X-Large Head 18mm 304 Stainless Steel
All size heads will fit the Nacsan flying gaff handle
Lip Gaff Stainless Steel Size 16 Head
Made for landing your catch from a kayak or small boat, this Stainless Lip Gaff is small yet efficient. It's made from sturdy stainless steel with a standard shaped head and point tip. No need to bring lengthy gaffs.
Suitable for kayaks and small boats
Networkz Telescopic Gaff
Length: 117cm Closed Extends to 2m
Designed for use in small trailer boats, the pole can be retracted to a smaller length when not in use for easy stowing and transport.
AFTCO Flying Gaff 6'7" Taper-Tip Gaff complete with 13", 10" or 8" hook
13" (340mm) Hook CODE: AFG13
10" (260mm) Hook CODE: AFG10
8" (200mm) Hook CODE: AFG8
AFTCO Flying Gaff Hooks are available in 8", 10" and 13-inch sizes. Any of these hooks will fit into the same shaft.
Overall length with 13" 33cm head = 2.43m.
Overall length with 10" 25cm head = 2.20m.
Overall length with 8" 20cm head = 2.18m.
Rig with soft, 5/8" diameter, 3-strand nylon rope spliced directly to the hook eye.
IGFA allows a maximum combined length of 25 feet of total rope and hook but for most boats the rope should only be as long as the farthest distance a crew member can reach with the gaff from its point of attachment to the boat.
The nylon rope should be stretched tight and passed around the end of the handle, through the gimbal, and back up past the second handle grip, where it can be secured with a couple of wraps of 1" masking tape.